Alarms and sensors-relays Teplopribor ROS,DRPV,DRU,UZR,UZS,ERSU, etc.

Sensors-flow relays

The sensor-relay of the air flow DRPV-2 is designed to monitor the air flow rate, as well as other gas media that are non-aggressive with respect to aluminum alloys, zinc coating and enamel coating ML-165, in horizontal and vertical ducts with the output of an electrical signal in case of deviation from the set value.

DRPV-2 Technical Description

Sensors-level relays

Sensors-level relays ROS 101, ROS 101I are designed to monitor the level of electrically conductive and non-electrically conductive liquids, solid (lumpy) media, grain and its grinding products, as well as the separation of media: water - light petroleum products, liquefied petroleum gases - water and other liquids with sharply different dielectric permittivity in stationary and shipboard conditions.

ROS 101, ROS 101I Technical Description

Sensors-level relays ROS 102, ROS 102I are designed to control 2 independent limit levels of electrically conductive and non-electrically conductive liquids, solid (lumpy) media, grain and its grinding products, liquefied gases, as well as the separation of media: water - light petroleum products, liquefied petroleum gases - water and other liquids with sharply different dielectric properties permeability.

ROS 102, ROS 102I Technical Description

Sensors-level relays ROS 301, ROS-301I are designed to monitor three levels of electrically conductive liquids through three independent channels in one or in different tanks in stationary and shipboard conditions outside explosive zones.

ROS 301, ROS-301I Technical Description

The ROS 302 level sensor– relay is designed to signal and maintain within the specified limits three levels of electrically conductive liquids in one or different tanks.

ROS 302 Technical Description

Sensors-liquid level relays two-position DRU-1PM, DRU-1PMR are designed to monitor the upper or lower level of fresh water with chromepik, oils, low-freezing cooling liquid, faecal liquid, diesel fuel.

DRU-1PM, DRU-1PMR Technical Description

Microprocessor level sensors ROS 200, ROS 200V are designed to monitor the level of electrically conductive and non-electrically conductive liquid, solid (bulk) media, liquefied gases, as well as the separation of media: water-light petroleum products, water-liquefied hydrocarbon gases and other liquids with sharply different relative permittivity in various process tanks and storage facilities in stationary and shipboard conditions.

ROS 200, ROS 200V Technical Description

Level controls

Ultrasonic level regulator UZR-1, UZR-1I is designed to control and regulate the level of non-boiling media, non-aggressive to steel 12X18N10T, in apparatuses and vessels of stationary and ship installations.

UZR-1, UZR-1I Technical Description

Level alarms

Ultrasonic level detectors UZS-107, 108 are designed to control one level, UZS-207, 208 - to control two levels, UZS-209, 210 - to control two levels in one technological opening. Signaling devices provide two types of signaling for each control point: the presence (H) or absence (O) of a controlled environment.

UZS-10x, -20x Technical Description

Ultrasonic level detectors UZS-300 (300I), -400 (400I) are designed to monitor from one to four positions of the level of non-boiling liquid media in various technological tanks and storages in stationary and shipboard conditions. Signaling devices provide two types of signaling: the presence (H) or absence (O) of a controlled environment.

UZS-300, -400 Technical Description